Preface: I'm a newbie!

I have been lucky enough to sometimes print jobs that had little to no problems. Other times (such as now!), I have issues I simply seem unable to fix. :[

Here's the problem:
In the design of a card, I have text that is 9 points tall (Gotham)...Blobs appear within the small circles of B, 9, and so forth, while other, larger text appears fine.

See images for examples of what I have tried and the best that it's done. You can see that even with less packing and the chase adjusted outward, the blobs still appear.

Things I've tried:
- Checking roller height with the lollipop and adjusting as necessary.
- Removing or adding packing.
- Cleaning off my plate in hopes it was just dried ink.
- Running at least 10 prints to see if it would get better.
- Adjusting chase outward (meaning, less of impression) - the C&P has two knobs to do this.

The specs:
- Chandler & Price 10x15 Craftsman (1965; it is an automatic model, but I hand-feed it)
- Boxcar Base (Deep relief)
- Polymer Plate KF152
- Very new rollers (re-done by Advanced Roller Co. in CA)

I have strong suspicions my text was just too small. Gotham 9pt, measures at 2 millimeters as printed. I am really hoping the answer is not to get the plate re-made with bigger text. :(

Packing thinned, chase adjusted for less of impression: you still see blobs.

Intermediate next steps back toward more packing and chase brought in a little more: still blobs --

Another step up:

The best I could get it

Views: 152

Reply to This

Replies to This Discussion

To me it looks like it could be too much ink, too little pressure or packing, and naturally bumpy stock. Maybe try taking about a third of the ink off the disk, adding a sheet of soft packing, and see if that helps?

RSS

Photos

Loading…
  • Add Photos
  • View All

LetterpressConference.co

LoLP Book + Shirts + More

Videos

  • Add Videos
  • View All

Badge

Loading…

© 2017   Created by Kseniya Thomas.   Powered by

Badges  |  Report an Issue  |  Terms of Service