Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts

  • Camilla Gurun
    Participant
    @camillagurun
    11 years, 6 months ago

    Hey all!

    I am starting to expand my skills a bit, and wanted to know if anyone had any tips on how to do edge coloring.  Anything will help, especially some best practices, ink recommends, etc…


    Tiffany Smith
    Participant
    @tiffanysmith
    11 years, 1 month ago

    There are some great references on Flickr. Most people don’t like to share their edge painting secrets. Meh.

    Here is one from Ladyfingers (just scroll a bit more to the right on their photostream to see more after this image):

    http://www.flickr.com/photos/59953150@N07/6069943436/in/set-72157627493081608/

    And also this one:

    http://www.flickr.com/photos/bogtrykkeren/6925309166/in/faves-niftysmith/


    Cindi Pedersen
    Participant
    @cindipedersen
    11 years, 1 month ago

    There is a good video from Crane: Hand-bordering Stationery at Crane & Co.

    http://www.youtube.com/watch?v=5bClJvo4jro


    Annika Buxman
    Participant
    @annikabuxman
    10 years, 12 months ago

    I’ve tried edge coloring a dozen different ways and have finally settled on using an airbrush (The Copic marker airbrush is great with virtually no cleanup and you can easily match pantone colors). I put the cards in the cutter, slice, and leave the clamp down. The clamp down ensures that the cards are nice and straight. Mask around the stack with blue masking tape so I don’t get ink all over my cutter and spray that side. Then flip and slice/airbrush the second side, etc. Any way you do it, it takes time. Good luck!


    Renata K.
    Participant
    @renatak
    10 years, 8 months ago

    i’ve had success with professional spray paint cans. i clamp a stack and lightly go around and around until i get the coverage i am looking for with that color. however, it is a bit touch and go with a spray can. one splorch can ruin your whole stack of expensive 220#. so i recently bit the bullet and bought an airbrush. i had a 40% off coupon for Blick and bought a starter kit with a really good airbrush, compressor and some paint too. wow, what a difference. very consistent.

    i clamp small stacks (25 pieces or less at a time) with small plastic clamps i picked up from home depot. i use a rough piece on the top and the bottom to try and save my heavy stock. then slowly just make my way around depositing more color as i rotate the stack. i was thinking of getting a cake turner or something like that to help.

    here are some examples from my tests:

    http://instagram.com/p/a_pLF2sKPn/

    http://instagram.com/p/ZD7VC0sKMH/

    http://instagram.com/p/bzKnOdMKMe/


    Annika Buxman
    Participant
    @annikabuxman
    10 years, 8 months ago

    Yes. I use the copic marker airbrush. I guess my “easily match pantone colors” comment was not quite accurate. But they do have a lot to choose from.


    Camilla Gurun
    Participant
    @camillagurun
    10 years, 8 months ago

    Wow, thanks everyone. These are some great tips. I’ll keep an eye out for a blick coupon as an airbrush seems like a good investment.  Much appreciated! 


    Jessica C. White
    Participant
    @jessicacwhite
    10 years, 8 months ago

    I haven’t done a lot of edge coloring, but I’ve had the most success with the air brush method. I wrote a little how-to for Felt & Wire a few months ago, posted here – 

    http://www.mohawkconnects.com/feltandwire/2013/06/27/letterpress-business-cards-with-an-edge-2/

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.