Ladies of Letterpress Homepage › Forums › Press Troubleshooting, Tips, and Help › Is there such a thing as “timing” on a platen press?

Is there such a thing as “timing” on a platen press?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts

  • Melinda F
    Participant
    @melindaf
    11 years, 8 months ago

    I just got a 8×12 C&P old style press from a sweet little elderly man this weekend. The press is assembled accept for the flywheel and flywheel shaft. He told me to call him when I want to put the flywheel back onto the press….he said to call him so he can set the timing. What does that mean? Anyone know? Thank you for your input 🙂


    mare blocker
    Participant
    @mareblocker
    11 years, 8 months ago

    Are you using a treadle or a motor to power the press? If you’re using a motor, the drive belt will need to be adjusted to the correct tension. And some motors have adjustable speeds, so perhaps that’s what he’s calling the timing. But I usually think “timing” in this situation is the operator’s hand eye coordination and attention span. 


    Melinda F
    Participant
    @melindaf
    11 years, 8 months ago

    Thank you Mare. The press doesn’t have a treadle (sadly) and the motor he gave me is broken. I took the motor just for a reference when I get it up and running. I’m not sure what to do with it yet. It came with 2 belts. Thank you again very much 🙂


    mare blocker
    Participant
    @mareblocker
    11 years, 8 months ago

    It’s pretty easy to find (or make) a treadle! I made one out of a u bolt/metal rod and an old metal table leg, it works great. or there are usually a few on ebay, or google them. the treadle is easier to control (for me) than the motor, and in my heyday I could do about 400 impressions an hour…good luck! it’s always empowering to get an old press up and running.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.