Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts

  • Liza Bambenek
    Participant
    @lizabambenek
    8 years, 3 months ago

    Wondering if anyone has a C&P with the original belt driven clutch pulley on the right side–Mine seems to be irregular and speed control is compromised.  Does anyone know how best to maintain or set the clutch pads, etc?  Thanks.


    Liza Bambenek
    Participant
    @lizabambenek
    8 years, 3 months ago

    Got it figured out—the wooden shoes which engage with the spinning pulley and cause the press to be driven can be adjusted to a desired maximum speed by raising or lowering set screws.  once the ideal speed is set and locked in, the lever either engages the press to drive at that speed or completely disengages the press until it slows to a stop.  If anyone has any questions, I can talk you through the adjustment.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.